东莞市贝尔试验设备有限公司

服务热线

力学事业部banner

Battery Test / Battery Shock Impact Tester (Pneumatic)

Battery Shock Impact Tester (Pneumatic )
  • 1. Features:

    1.1.Employs pneumatic principle to solve pin breaking and low speed variation of variable cam shock table and reproduce actual shock impact environment.

    1.2. Essential Components such as sealing rings, solenoid valve are sourced from world-branded Parker, SMC to ensure tester quality and reliability.

    1.3.Height measuring devices with advanced electric sliding scale, fully computer control ,with high precision .

    Height measuring system introduces with advanced motorize slide scale,fully computerized control to ensure high accuracy.

    1.4. Reasonal bench top structure design with high reliability, high performance, wide application, which is applicable for test specimens with large load & large torque in a frequent shock & impact test demand.

     

    2. Standard Compliance

    2.1.YD/T 2344.1—2011 LiFePO4battery system for telecommunications. Part 1:Integrated battery system

    2.2.GB/T 2423.5Environmental testing for electric and electronic products. Part 2: Test methods. Test Ea and guidance: Shock

    2.3.GB/T 2423.6Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump

    2.4.IEC 68-2-29Test Eb and guidance:Bump

    2.5.JJG497-2000Verification Regulation of Bump Testing Machines


    3. Technical Parameters

    3.01.Model

    BS-50

    3.01.Max. Loading Capacity

    50kg

    3.02.Bench Size

    500mm×700mm

    3.03.Pulse Wave

    half-sine wave

    3.04.Shock Peak Acceleration

    half-sine wave 251000m/s2

    3.05.Pulse Width

    half-sine wave220ms

    3.06.Max. Shock Frequency

    80times /min

    3.07.Max.Drop Height

    120mm

    3.08.External Dimension

    L800 X W640 X H710mm

    3.09.Power Consumption

    Bench power consumption 2.0KVAAir compressor power consumption 11.0KVA

    3.10.Bench Weight

    1100Kg

    3.11.Power Source

    AC 380V±10% 3Phase   50Hz

    3.12.Air Source /Air supply pressure

    0.8m3/min/8kg/cm2

    3.13.Working Condition

    a PowerAC 380V±10% 3Phase  50Hz

    b Environment Temp. 5℃-40℃

    c Relative Humidity ≤90%25℃

    d Surrounding environmentNo corrosive medium,dry and with good ventilation,away from electromagnetic interference and heavy vibration source which may influence the normal operation of the machine 

    4. AKS01 Measurement and Control System 

    4.1 Features

    1.  Special design measurement and control system for IS series pneumatic shock impact tester.

    2. With USB2.0 interface and PC communication transmission control demand & data measurement

    3. With power-off protection ,bench lift height limitation and pre-shock alarm function etc, safety reliable .  Bench elevating height limit function & alerting indication system before shock, which is more reliable and safe;

    This Shock control measurement system is a special shock wave capture and analysis platform that based on high quality DSP con structure dynamic measure, analysis and control. It consists of control system, measurement system & software system based on WINDOWS to control modular & low noise design measurement hardware to achieve control & measure sub functional hardware electrical circuit installing in the interface cabinet with independent integral con structure ( independent control cabinet and measurement cabinet). USB2.0 is introduced to connect the communication of interface cabinet & PC. This test sytem is applicable for impact capture, measurement, analysis in a general shock and high impact  and complies with standards ISO, MIL-STD, IEC, OEO, ASTM etc.

    4.2Technical Parameters

    Input Channel

    Input Channel

    with 1 electric charge input channel

    Sampling Frequency

    Max 200k

    Voltage Range

    -10Vp+10Vp

    Coupling Mode

    Electric Charge

    ADC Resolution

    16 Bites

    Pulse Width

    0.5-1,000ms

    Max. Acceleration

    5000g

    Dynamic Range

    80dB

    Harmonic Distortion

    <-95dB

    Noise

    >95dB

    Frequency Accuracy

    0.01%

    Standard Compliance

    ISO,MIL-STD-810,User defined criteria

    External Start

    Yes

    Mechanical Parameters

    Dimension

    242mm×220mm×96mm

    Weight

    2.5kg



Main Products : Environmental Chamber, Climatic Chamber, Thermal Shock Test Chamber, Walk in Test Chamber, Altitude Chamber, Battery safety testing equipments ,Tensile Testing Machine  etc. 

Tel:0086-769-23280910 Fax: 0086-769-22673576 Email : sales@bellgroup.cc Skype: bell.sales1&a